|
Electrical Specification
|
|
INPUT VOLTAGE:
|
+24V d.c. ±0.5V at 0.7A, current control option needs -15V d.c.±0.5V at 0.02A. |
|
OUTPUT VOLTAGE:
|
0 to 5kV at 50µA. |
|
CONTROL:
|
Current control mode: 0 to +5V gives 0 to 50µA.
Voltage control mode 0 to +10V gives 0 to ±5kV. |
| VOLTAGE MONITOR: |
0 to +10V represents 0 to ±5kV, source resistance 10kohm. Tolerance ±5%. |
| POLARITY: |
Reversible. Selection is by grounding of appropriate control lines.
Current less than 25 mA. |
|
LINE REGULATION:
|
Better than 100ppm for 1V change in input voltage. |
|
LOAD REGULATION:
|
Better than 100ppm for 10% to full load. |
|
RIPPLE:
|
Better than 1 volt peak to peak. |
|
TEMPERATURE COEFFICIENT:
|
150ppm/°C or better. |
|
OPERATING TEMPERATURE:
|
0°C to +45°C. |
|
INHIBIT (pin 8):
|
Low = on, high or O/C = off. |
