|
Isolated Grid Module Output Isolation to 50kV 120V-1.2kV
Applications
- Micro-focus Grounded Anode X-Ray Tubes:
- Focus electrode driver
- Extraction Electrode driver including beam current control
|
 |
The K1/112 uses the proven oscillator from the standard 10Watt HP Series and are intended to provide X-ray tube grid control up to 1.2kV. The grid can be isolated from ground by up to 50kV, while power input & control remain at ground potential. Higher isolation voltages, and different o/p voltages are also possible; please consult the factory for more details. Beam current stabilisation and control can optionally be included for extraction current control.
Pin Connection & Safety Instructions
Electrical Specification
|
| INPUT VOLTAGE: |
+ 24 volt at 0.75 amp max |
|
| OUTPUT VOLTAGE: |
120V to 1.2kV at 3mA. Isolated to 50kV |
|
| CONTROLS: |
0 to + 10V gives 0 to 1.2kV ±15% |
|
| VOLTAGE MONITORS: |
0 to + 10V represents 0 to 1.2 kV. ±15%. |
Source resistance 10 kohm. |
| RIPPLE: |
Less than 2% peak to peak on each output. |
(measured with 100pf load capacitance.) |
| LINE REGULATION: |
Less than 0.1% for 1V change in 24V. |
|
| LOAD REGULATION: |
Less than 10% of full scale for 0-3mA change in load current. |
|
| TEMPERATURE COEFFICIENT: |
Better than 1% per °C. |
|
| OPERATING TEMPERATURE: |
0 °C to + 45 °C. |
|
Mechanical Specification
|
|
SIZE:
|
280 x 120 x 60mm |
| OUTPUT CABLES: |
2 off TV50 screened length 1 metre approx. |
| INPUT CONNECTOR: |
Molex 12 way connector. |
|
